Choose your accesories
Tracked shipping
Warranty service
Same day shipping
$5.00
ATTENTION! Batteries cannot be shipped to any country, except for the USA.
$5.00
ATTENTION! Batteries cannot be shipped to any country, except for the USA.
The installation and placement of the kit is very simple and is done in a few minutes, without any special knowledge.
Here we show you how it is:
Motor
Battery
Charging Time
Range
Charger
External charging
Accessories
PAS sensor
Security block
Water resistance
Max. velocity
Inclination grades
Max. weight
250-800W Variable*
UP TO 12Ah 36V (Lithium)
From 1HR TO 3HR
5-16mi expandable
Transformer 110V-220V
Cable adaptator
Hand throttle and/or screen
Fast Fit
With key
IP68 (motor & sensor)
UP TO 37KM/H*
UP TO 15%
220lbs + bicycle
(*) Limited
Long
Width
Tall
Weight
11.8in
11.8in
9.8in
5.95lbs (w/ 4.4Ah battery & w/o accesories)
Finger: Similar to quad-cycles.
Hand: Similar to motorcycles. OUT OF STOCK
LED: This screen have 3 assistance modes. INCLUDED FREE
LCD: This screen have 5 assistance modes and various interactive functions.
Now it is easier to move with your KAR. You can load your kit anywhere. Just take the battery out of it and take it wherever you want. This external charging cable is the connector that connects the charger cable with the standard XT60 plug of the battery.
Learn more 
Learn more
Learn more
Learn more
Learn more
Learn more
Learn more
Learn more
Learn more
Of course! It does not affect or occupy space of the folding. Also for weighing less than 5.9 lbs does not require any effort.
It is not necessary to keep pedaling, if you use a throttle on the handlebars, this is an optional accessory. (Accessory restricted in some countries)
Of course! You disassemble it from your old bike, and perform the same installation on the new bike. Can practically be installed on 99.9%, most bikes.
The kit installs in minutes quite easily. It does not require electrical knowledge. You may need some common tools like a pipe wrench, pliers, and scissors.
The included charger has an indicator of the battery charge status as well as the LED screen. Also, if you have a throttle to the handlebar or a LCD screen you can know the battery charge in real time.
No! Installs easily without disassembling any part of the bike.
Aston Rider Kits are prepared for different speeds, you must consult the regulations of your locality for the safe use of electric bikes.
The KAR goes on almost any bike, of any tire. Other kits need to change the wheel and demand to be special for each wheel size. Plus, our kit is very discreet, lightweight, and powerful. Kits on the market are heavy, expensive, and low-performance.
The kit, without the (optional) throttle accessory, functions as a Pedaling Assistant. This means that the motor will start when it detects you are pedaling. And it will help you automatically, it will also slow down when it detects that you stop pedaling.
Yes! With manual engagement, in seconds you can remove the motor from traction with the wheel and re-engage it whenever you want.
Yes! You can remove the battery at any time and put it to charge externally, for this you will need the accessory (optional) external battery charger cable.
The motor is sealed and does not need servicing. Although, in the purchase of your KAR we give you a free video-call service after 6 months!
To see our videos, enter to our YouTube channel: https://youtube.com/c/astonrider
No problem! Send us a photo of your bike onto the chat, and a technician will be answering you soon.
Still didn't find what you looking for? Click here to contact us through Messenger or Mail
